Getting started with LXC using libvirt

Posted: September 27th, 2011 | Filed under: Fedora, libvirt, Virt Tools | Tags: , , | 26 Comments »

For quite a while now, libvirt has had an LXC driver that uses Linux’s namespace + cgroups features to provide container based virtualization. Before continuing I should point out that the libvirt LXC driver does not have any direct need for the userspace tools from the LXC sf.net project, since it directly leverages APIs the Linux kernel exposes to userspace. There are in fact many other potential users of the kernel’s namespace APIs which have their own userspace, such as OpenVZ, Linux-VServer, Parallels. This blog post will just concern itself solely with the native libvirt LXC support.

Connecting to the LXC driver

At this point in time, there is only one URI available for connecting to the libvirt LXC driver, lxc:///, which gets you a privileged connection. There is not yet any support for unprivileged libvirtd instances using containers, due to restrictions of the kernel’s DAC security models. I’m hoping this may be refined in the future.

If you’re familiar with using libvirt in combination with KVM, then it is likely you are just relying on libvirt picking the right URI by default. Well each host can only have one default URI for libvirt, and KVM will usually take precedence over LXC. You can discover what libvirt has decided the default URI:

# virsh uri
qemu:///system

So when using tools like virsh you’ll need to specify the LXC URI somehow. The first way is to use the ‘-c URI’ or ‘–connect URI’ arguments that most libvirt based applications have:

# virsh -c lxc:/// uri
lxc:///

The second option is to explicitly override the default libvirt URI for your session using the LIBVIRT_DEFAULT_URI environment variable.

# export LIBVIRT_DEFAULT_URI=lxc:///
# virsh uri
lxc:///

For the sake of brevity, all the examples that follow will presume that export LIBVIRT_DEFAULT_URI=lxc:/// has been set.

A simple “Hello World” LXC container

The Hello World equivalent for LXC is probably a container which just runs /bin/sh with the main root filesystem / network interfaces all still being visible. What you’re gaining here is not security, but a rather way to manage resource utilization of everything spawned from that initial process. The libvirt LXC driver currently does most of its resource controls using cgroups, but will also leverage the network traffic shaper directly for network controls which you want to be done per virtual network interface, not per cgroup.

Anyone familiar with libvirt will know that to create a new guest, requires an XML document specifying its configuration. Machine based virtualization requires either a kernel/initrd or a virtual BIOS to boot, and can create a fullyvirutalized (hvm) or paravirtualized machine (xen). Container virtualization by contrast, just wants to know the path to the binary to spawn as the container’s “init” (aka process with PID 1). The virtualization type for containers is thus referred to in libvirt as “exe”. Aside from the virtualization type & path of the initial process, the only other required XML parameters are the guest name, initial memory limit and a text console device. Putting this together, creating the “Hello World” container will require an XML configuration that looks like this:

# cat > helloworld.xml <<EOF
<domain type='lxc'>
  <name>helloworld</name>
  <memory>102400</memory>
  <os>
    <type>exe</type>
    <init>/bin/sh</init>
  </os>
  <devices>
    <console type='pty'/>
  </devices>
</domain>
EOF

This configuration can be imported into libvirt in the normal manner

# virsh define helloworld.xml
Domain helloworld defined from helloworld.xml

then started

# virsh start helloworld
Domain helloworld started
# virsh list
Id Name                 State
----------------------------------
31417 helloworld           running

The ID values assigned by the libvirt LXC driver are in the process ID of the libvirt_lxc helper process libvirt launches. This helper is what actually creates the container, spawning the initial process, after which it just sits around handling console I/O. Speaking of the console, this can now be accessed with virsh

# virsh console helloworld
Connected to domain helloworld
Escape character is ^]
sh-4.2#

That ‘sh’ prompt is the shell process inside the container. All the container processes are visible outside the container as regular proceses

# ps -axuwf

...

root     31417  0.0  0.0  42868  1252 ?        Ss   16:17   0:00 /usr/libexec/libvirt_lxc --name helloworld --console 27 --handshake 30 --background
root     31418  0.0  0.0  13716  1692 pts/39   Ss+  16:17   0:00  \_ /bin/sh
...

Inside the container, PID numbers are distinct, starting again from ‘1’.

# virsh console helloworld
Connected to domain helloworld
Escape character is ^]
sh-4.2# ps -axuwf
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root         1  0.0  0.0  13716  1692 pts/39   Ss   16:17   0:00 /bin/sh

The container will shutdown when the ‘init’ process exits, so in this example when ‘exit’ is run in the container’s bash shell. Alternatively issue the usual ‘virsh destroy’ to kill it off.

# virsh destroy helloworld
Domain helloworld destroyed

Finally remove its configuration

# virsh undefine helloworld
Domain helloworld has been undefined

Adding custom mounts to the “Hello World” container

The “Hello World” container shared the same root filesystem as the primary (host) OS. What if the application inside the container requires custom data in certain locations. For example, using containers to sandbox apache servers, might require a custom /etc/httpd and /var/www. This can easily be achieved by specifying one or more filesystem devices in the initial XML configuration. Lets create some custom locations to pass to the “Hello World” container.

# mkdir /export/helloworld/config
# touch /export/helloworld/config/hello.txt
# mkdir /export/helloworld/data
# touch /export/helloworld/data/world.txt

Now edit the helloworld.xml file and add in

<filesystem type='mount'>
  <source dir='/export/helloworld/config'/>
  <target dir='/etc/httpd'/>
</filesystem>
<filesystem type='mount'>
  <source dir='/export/helloworld/data'/>
  <target dir='/var/www'/>
</filesystem>

Now after defining and starting the container again, it should see the custom mounts

# virsh define helloworld.xml
Domain helloworld defined from helloworld.xml
# virsh start helloworld
Domain helloworld started
# virsh console helloworld
Connected to domain helloworld
Escape character is ^]
sh-4.2# ls /etc/httpd/
hello.txt
sh-4.2# ls /var/www/
world.txt
sh-4.2# exit

# virsh undefine helloworld
Domain helloworld has been undefined

A private root filesystem with busybox

So far the container has shared the root filesystem with the host OS. This may be OK if the application running in the container is going to an unprivileged user ID and you are careful not to mess up your host OS. If you want todo things like running DHCP inside the container, or have things running as root, then you almost certainly want a private root filesystem in the container. In this example, we’ll use the busybox tools to setup the simplest possible private root for “Hello World”. First create a new directory and copy the busybox binary into position

mkdir /export/helloworld
cd /export/helloworld
mkdir -p bin var/www etc/httpd
cd bin
cp /sbin/busybox busybox
cd /root

Next step is to setup symlinks for all the busybox commands you intend to use. For example

for i in ls cat rm find ps echo date kill sleep \
         true false test pwd sh which grep head wget
do
  ln -s busybox /root/helloworld/bin/$i
done

Now all that is required, is to add another filesystem device to the XML configuration

<filesystem type='mount'>
  <source dir='/export/helloworld/root'/>
  <target dir='/'/>
</filesystem>

With that added to the XML, follow the same steps to define and start the guest again

# virsh define helloworld.xml
Domain helloworld defined from helloworld.xml
# virsh start helloworld
Domain helloworld started

Now when accessing the guest console a completely new filesystem should be visible

# virsh console helloworld
Connected to domain helloworld
Escape character is ^]
# ls
bin      dev      etc      proc     selinux  sys      var
# ls bin/
busybox  echo     grep     ls       rm       test     which
cat      false    head     ps       sh       true
date     find     kill     pwd      sleep    wget
# cat /proc/mounts
rootfs / rootfs rw 0 0
devpts /dev/pts devpts rw,seclabel,relatime,gid=5,mode=620,ptmxmode=666 0 0
/dev/mapper/vg_t500wlan-lv_root / ext4 rw,seclabel,relatime,user_xattr,barrier=1,data=ordered 0 0
devpts /dev/pts devpts rw,seclabel,relatime,gid=5,mode=620,ptmxmode=666 0 0
devfs /dev tmpfs rw,seclabel,nosuid,relatime,mode=755 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
proc /proc/sys proc ro,relatime 0 0
/sys /sys sysfs ro,seclabel,relatime 0 0
selinuxfs /selinux selinuxfs ro,relatime 0 0
devpts /dev/ptmx devpts rw,seclabel,relatime,gid=5,mode=620,ptmxmode=666 0 0
/dev/mapper/vg_t500wlan-lv_root /etc/httpd ext4 rw,seclabel,relatime,user_xattr,barrier=1,data=ordered 0 0
/dev/mapper/vg_t500wlan-lv_root /var/www ext4 rw,seclabel,relatime,user_xattr,barrier=1,data=ordered 0 0

Custom networking in the container

The examples thus far have all just inherited access to the host network interfaces. This may or may not be desirable. It is of course possible to configure private networking for the container. Conceptually this works in much the same way as with KVM. Currently it is possible to choose between libvirt’s bridge, network or direct networking modes, giving ethernet bridging, NAT/routing, or VEPA respectively. When configuring private networking, the host OS will get a ‘vethNNN’ device for each container NIC, and the container will see their own ‘ethNNN’  and ‘lo’ devices. The XML configuration additions are just the same as what’s required for KVM, for example

<interface type='network'>
  <mac address='52:54:00:4d:2b:cd'/>
  <source network='default'/>
</interface>

Define and start the container as before, then compare the network interfaces in the container to what is in the host

# virsh console helloworld
Connected to domain helloworld
Escape character is ^]

# ifconfig
eth0      Link encap:Ethernet  HWaddr 52:54:00:16:61:DA
inet6 addr: fe80::5054:ff:fe16:61da/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:93 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5076 (4.9 KiB)  TX bytes:468 (468.0 B)

lo        Link encap:Local Loopback
inet addr:127.0.0.1  Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING  MTU:16436  Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface

We have a choice of configuring the guest eth0 manually, or just launching a DHCP client. To do manual configuration try

# virsh console helloworld
Connected to domain helloworld
Escape character is ^]
# ifconfig eth0 192.168.122.50
# route add 0.0.0.0 gw 192.168.122.1 eth0
# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         192.168.122.1   255.255.255.255 UGH   0      0        0 eth0
192.168.122.0   *               255.255.255.0   U     0      0        0 eth0
# ping 192.168.122.1
PING 192.168.122.1 (192.168.122.1): 56 data bytes
64 bytes from 192.168.122.1: seq=0 ttl=64 time=0.786 ms
64 bytes from 192.168.122.1: seq=1 ttl=64 time=0.157 ms
^C
--- 192.168.122.1 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.157/0.471/0.786 ms

Am I running in an LXC container?

Some programs may wish to know if they have been launched inside a libvirt container. To assist them, the initial process is given two environment variables, LIBVIRT_LXC_NAME and LIBVIRT_LXC_UUID

# echo $LIBVIRT_LXC_NAME
helloworld
# echo $LIBVIRT_LXC_UUID
a099376e-a803-ca94-f99c-d9a8f9a30088

An aside about CGroups and LXC

Every libvirt LXC container gets placed inside a dedicated cgroup, $CGROUPROOT/libvirt/lxc/$CONTAINER-NAME. Libvirt expects the memory, devices, freezer, cpu and cpuacct cgroups controllers to be mounted on the host OS. Work on leveraging cgroups inside LXC with libvirt is still ongoing, but there are already APIs to set/get memory and CPU limits, with networking to follow soon. This is could be a topic for a blog post on its own, so won’t be discussed further here.

An aside about LXC security, or lack thereof

You might think that since we can create a private root filesystem, it’d be cool to run an entire Fedora/RHEL OS in the container. I strongly caution against doing this. The DAC (discretionary access control) system on which LXC currently relies for all security is known to be incomplete and so it is entirely possible to accidentally/intentionally break out of the container and/or impose a DOS attack on the host OS. Repeat after me “LXC is not yet secure. If I want real security I will use KVM”. There is a plan to make LXC DAC more secure, but that is no where near finished. We also plan to integrate sVirt with LXC to so that MAC will mitigate holes in the DAC security model.

An aside about Fedora >= 15, SystemD and autofs

If you are attempting to try any of this on Fedora 16 or later, there is currently an unresolved problem with autofs that breaks much use of containers. The root problem is that we are unable to unmount autofs mount points after switching into the private filesystem namespace. Unfortunately SystemD uses autofs in its default configuration, for several type mounts. So if you find containers fail to start, then as a temporary hack you can try disabling all SystemD’s autofs mount points

for i in `systemctl --full | grep automount | awk '{print $1}'`
do
  systemctl stop $i
done

We hope to resolve this in a more satisfactory way in the near future.

The complete final example XML configuration

# cat helloworld.xml
<domain type='lxc'>
  <name>helloworld</name>
  <memory>102400</memory>
  <os>
    <type>exe</type>
    <init>/bin/sh</init>
  </os>
  <devices>
    <console type='pty'/>
    <filesystem type='mount'>
      <source dir='/export/helloworld/root'/>
      <target dir='/'/>
    </filesystem>
    <filesystem type='mount'>
      <source dir='/export/helloworld/config'/>
      <target dir='/etc/httpd'/>
    </filesystem>
    <filesystem type='mount'>
      <source dir='/export/helloworld/data'/>
      <target dir='/var/www'/>
    </filesystem>
    <interface type='network'>
      <source network='default'/>
    </interface>
  </devices>
</domain>

26 Responses to “Getting started with LXC using libvirt”

  1. LXC is not yet secure. If I want real security I will use KVM

  2. Lans says:

    Best easter egg ever – I had no idea libvirt didn’t rely upon LXC userspace. Great post, these docs need to get shared/advertised more.

    I tried this on RHEL6.1, and it mostly worked. I end up with:

    [root@foo ~]# pstree -pal `pidof libvirt_lxc`
    libvirt_lxc,2167 –name helloworld –console 20 –background
    └─sh,2169

    …but I can’t use “virsh console helloworld”, I get:

    [root@foo ~]# virsh console helloworld
    Connected to domain helloworld
    Escape character is ^]
    error: internal error cannot find default console device

    Is that a bug against RHEL6.1 libvirt, or am I doing something wrong?

  3. Lans says:

    The initial helloworld.xml wasn’t quite right – it doesn’t allow “virsh console helloworld” to work. The device entries need to wrap the console entry like so:

    helloworld
    102400

    exe
    /bin/sh

    Then the example works under RHEL 6.1 as well as Fedora.

  4. Daniel Berrange says:

    @lans the LXC code in RHEL-6.1 had quite a few problematic bugs, so I don’t recommend testing with that. Better to wait for RHEL-6.2 or try Fedora.

  5. Hello Daniel,

    I am eagerly waiting LXC to be fully functional and want to play with..

    any idea when LXC final version will come out..

    thanks,
    Amitabh

    • Daniel Berrange says:

      @Amitabh there isn’t really any concept of “final’ release. It is more just a process of continual innovation & improvement. I guess by “final” you are probably asking, when you will be able to run arbitrary full OS in a container. I think that is still quite a long way off, to the extent I wouldn’t make any predictions. Application sandboxing is where LXC is most useful in the short-to-medium term IMHO.

  6. […] Several sessions happened simultaneously. The ones I recall top off the head – Fedora packaging, Puppet. Shanks and myself also did a demo of SSSD and helped out people configure SSSD on their laptops.Later the day, I joined Izhar and little bit on LXC(Linux Containers). I’ve never tried out LXC before, apart from reading about it on the inter-webs. We started off by discussing pros and cons of LXC vs using regular virtual machines. At-least for him, the main bottle neck w/ VMs seems to be I/O. With LXC there is apparently no I/O bottleneck as there are no disk images, and a very small foot print on the host. Primarily useful for application sandboxing(Examples: deplyoing Plone or Drupal like CMS). Izhar gave a quick demo of LXC on his laptop and I did a quick try using Dan Berrange’s post of Getting started w/ LXC. […]

  7. Anders says:

    Is the paths under “A private root filesystem with busybox” correct?

    For example (this is for all code in that section), shouldn’t it be like this?

    mkdir /export/helloworld/root
    cd /export/helloworld/root
    mkdir -p bin var/www etc/httpd
    cd bin
    cp /sbin/busybox busybox
    cd /export/helloworld/root

    and

    for i in ls cat rm find ps echo date kill sleep \
    true false test pwd sh which grep head wget
    do
    ln -s busybox /export/helloworld/root/bin/$i
    done

  8. @Daniel – Thanks for your response..What i mean with final release is that fully functional so vendors like redhat will start offering with full support.

    I agree its continuous innovation/improvement.

    Thanks,
    Amitabh

  9. @anders I agree with you, i think that’s a bug.

  10. […] the words of Dan Berrange: Repeat after me “LXC is not yet secure. [. . […]

  11. kaivanov says:

    When I add the root context and start the container I get this error:

    Failed to query file context on /export/helloworld/root: No data available

    Any idea what’s wrong ?

    • Daniel Berrange says:

      Sounds like either you have SELinux disabled, or the filesystem at /export doesn’t supprot SELinux. This ought to be non-fatal, but depending on what libvirt version you have you might be hitting a bug causing it to be fatal

  12. kaivanov says:

    I do have selinux disabled. Do I need to have it enabled to be able to have this in my config:

  13. kaivanov says:

    One more question – how can I have apache running and not killing the container when I exit the console ? I start it by using virsh console, then start apache, but when I exit the container dies. Is there other way to start apache in the container?

  14. Wayne says:

    How do you start apache in the container?

  15. rick says:

    I have some basic question if you can help. I have lxc container up and running my biggest problem at the moment is loop back devices don’t work. Is there some way I can get this to work?

    2.6.32-358.11.1.el6.x86_64
    lxc-templates-0.8.0-1.el6.rf.x86_64
    lxc-libs-0.8.0-1.el6.rf.x86_64
    lxc-0.8.0-1.el6.rf.x86_64
    libvirt-client-0.10.2-18.el6_4.9.x86_64
    virt-viewer-0.5.2-18.el6_4.2.x86_64
    virt-manager-0.9.0-18.el6.x86_64

    Virsh command line tool of libvirt 0.10.2
    See web site at http://libvirt.org/

    Compiled with support for:
    Hypervisors: QEMU/KVM LXC ESX Test
    Networking: Remote Network Bridging Interface netcf Nwfilter VirtualPort
    Storage: Dir Disk Filesystem SCSI Multipath iSCSI LVM
    Miscellaneous: Daemon Nodedev SELinux Secrets Debug DTrace Readline

    ————————————————————

    Some side questions ….
    I’m confused by the diffrences between defining your lxc with xml using virsh and the lxc-create method Most that I google is reference to the lxc-* methods.
    Im working on a strictly RHEL 6.4 and lxc-* does not seem to be part of the standard packages
    Under the covers do these do the same thing?
    What mailing group would I best post questions like this ?
    Thx

  16. Uwe says:

    Hello Daniel,

    first of all I want to thank you for the great project “libvirt”!
    We are using libvirt since many years for controlling some kvm VMs.

    Recently I have tried to migrate one kvm-based SLES VM to libvirt_lxc.
    But what means “migrate”?! Of course, creating a new xml config file. Further I have implemented a small wrapper, which mounts the hdd img file loopback before starting the container.
    Everything seems to be ok with this. I can start the migrated VM and it is really running and working. But a shutdown of the container leads in the end to a power-off of the host. So, the power-off aciton of the container will be executed through the host system. ;(

    On the host I’m running SLES11.3 and libvirt-1.1.1 (libvirt-1.0.2 does the same).

    So, my question: What are the correct steps, to migrate a libvirt/kvm-VM to libvirt_lxc? Especially regarding the modifications inside the existing hard disk image? Or could this be a problem of the cgroups implementation of SLES11.3?

    Thanks very much in advance for your help!!!
    Uwe

  17. JJ says:

    Looks like I’m having some trouble to make this go. I’m using

    virsh -V
    Herramienta de línea de comandos virsh de libvirt 0.9.8
    Ver sitio web en http://libvirt.org/

    Compilado con soporte para:
    Hipervisores: Xen QEmu/KVM UML OpenVZ LXC Test
    Red: Remote Daemon Network Bridging Nwfilter VirtualPort
    Almacenaje: Dir Disk Filesystem SCSI Multipath iSCSI LVM
    Varios: AppArmor Secrets Debug Readline

    Which looks like it’s got support for LXC, but then when I try to run that file it bails out with:

    Error: Falló al definir un dominio para lxc.xml
    Error: internal error unexpected domain type lxc, expecting one of these: qemu, kqemu, kvm, xen

    That’s Spanish, but it basically says no go. Any idea?

  18. JJ says:

    OK, scratch that. it works, but only if you do:

    sudo virsh -c lxc:/// define helloworld.xml
    El dominio helloworld definido desde helloworld.xml

    That’s defining explicitly the URI to conect from the command. It doesn’t if you define a default URI using ENV variables.

  19. clacke says:

    JJ, if you add your user to the ‘libvirtd’ group you can run virsh without sudo. Environment variables are not (generally) carried over to the sudo environment.

  20. clacke says:

    Sorry, just realized that ‘libvirtd’ may be a Debian/Ubuntu convention, it may be different on your platform. But something along those lines.

  21. Mohit says:

    If i have setup a macvlan on the host, how could i use it with libvirt? What would be the libvirt xml look like? I tried tag and but failed to get it working.

    Any help will be appreciated.

  22. Rico says:

    Nice tutorial for CentOS 7. It works! I have tested it. The tutorial is German, but easy to read.

    https://der-linux-admin.de/2014/08/centos-7-centos-7-im-lxc-container

  23. […] Of particular concern was security, because the “DAC (discretionary access control) system on which LXC [originally] relie[d] for all security is… […]

Leave a Reply





Spam protection: Sum of thr33 plus f1ve ?: